ClearOne NetStreams DigiLinX Dealer User Manual
Page 219
IR Tools
7-3
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 7-3
Service and Frequency
5.
From the Service Type dropdown list, select the source device you’re using.
6.
From the Frequency dropdown list, select the frequency for the source device
you’re using.
NOTE:
The correct frequency must be selected prior to learning IR. The default is 38
KHz. See specifications for the attached device to ensure 38 KHz is the proper
operating frequency.
7.
Select Continue.
Commands to Learn display. This screen will vary depending on whether you are
learning IR for MediaLinX (see Figure 7-4) or for ViewLinX (see Figure 7-5).