Select a source type, Medialinx a/v info tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 77
Editing Devices
5-7
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
2.
After adjusting information on the Info page, select Apply.
Select the Source tab. Source tab information displays (see Figure 5-6). There are several types of sources:
Tuner, CD player, DVD player, Digital Video Recorder, Sirius, XM Tuner, Parasound ZTuner, Generic
Device, and iPort.
3.
Select a source type.
4.
Select a Video input type. If you select VGA for Video Input Type, the following screen appears.
Figure 5-6
Source tab with VGA selected
Source Name
The descriptive name entered by the installer when the
device was added. This name appears in the graphical user
interface.
Show Advanced Options
Normally used for advanced configurations. Typically, the
installer will not use this screen.
Table 5-5
MediaLinX A/V Info Tab
Tab
Selection Description