Controlinx and ge concord security system, Controlinx and ge concord security system -55 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 125
Editing Devices
5-55
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
7.
Enter TV IR controls. TV Controls allow you to create button names for buttons that execute Display IR
commands learned into the Panorama.
Figure 5-46
Source buttons
Table 5-34 provides information on the fields available for editing the Labels tab.
8.
After adjusting information, select Apply. If you are not connecting this ControLinX to a Doorbell/Telephone
Mute interface, your edits to the ControLinX are complete.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab for a ControLinX Contained in a MLA4000
on page 5-32.
ControLinX and GE Concord Security System
To edit ControLinX settings for the GE Concord security system, complete the following steps:
1.
Using the NetStreams RS232 cable (included with the ControLinX), connect 3.5mm phono connector of the
RS232 cable to the ControLinX.
Table 5-34
Labels Tab
Tab
Selection Description
Labels
Displays
The names of the displays assigned to the Panorama.
Sources
The names of the sources assigned to the Panorama.
TV Controls
The TV Controls area allows you to use IR commands that
you have learned into the Panorama for a connected TV. Up
to six IR commands can be entered. Once entered, the
commands are available from a TouchLinX.