Controlinx and vantage, Controlinx and vantage -112 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 182
DigiLinX Dealer Setup Version 2.35.00
5-112
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 5-96
Labels tab for the ControLinX hosting a GE Concord
7.
Enter a name for the zone in the Name field.
Table 5-78 provides information on the fields available for editing the Labels tab.
8.
After adjusting information, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab on page 5-85.
ControLinX and Vantage
To edit ControLinX settings for the Vantage lighting system, complete the following steps:
1.
Using the NetStreams RS232 cable (included with the ControLinX), connect the ControLinX to Vantage
through the RS232 (serial connection) on the Vantage controller.
2.
Click on the ControLinX in the ControLinX you want to edit in the project.
The Info tab displays as shown in Figure 5-97.
Table 5-78
Labels Tab
Tab
Selection Description
Labels
Zones
Up to eight zones of security can be defined for the GE
Concord.
Partition Number
Only 1 partition is supported.