ClearOne NetStreams DigiLinX Dealer - Manual (Page 53)

Creating and Saving Projects
3-17
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
1. Enter the following information:
ˆ Room Name. The room the IP speaker is located in.
ˆ Model Number. Select from the dropdown list (using the down arrow key) to
choose the correct model number of IP speakers being used.
ˆ Speaker Model:
 Polk LC265ip or
 Polk LC80i.
NOTE: A StreamNet SN1000 card must be inserted into the Polk Audio IP speakers to
be native on the DigiLinX network. Otherwise you will need a SpeakerLinX.
See Figure 3-19 for an example of the completed device information.
Figure 3-19 IP Speaker dialog box
2. Select Save & Continue.
Complete the configuration for all IP speakers. After finishing the last IP speaker,
you will be prompted for information for media server devices (if any). See
Figure 3-20.
Figure 3-20 Media Server dialog box
Entering Media Server Information