Ir/keylinx tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 148
DigiLinX Dealer Setup Version 2.35.00
5-78
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
10.
Select the IR tab. IR information displays (see Figure 5-62).
Figure 5-65
IR tab
Table 5-50
IR/KeyLinX Tab
Tab
Selection Description
KeyLinX
Enable Service
Enables or disables functionality.
Model Number
Select the model number of the KeyLinX, IRLinX, or KeyLinX
and IRLinX from the dropdown list.
Active Button Intensity
How bright the backlighting of the buttons on the KeyLinX
are when in an active state.
Inactive Button Intensity
How bright the backlighting of the buttons on the KeyLinX
are when KeyLinX is inactive.
Inactive Timeout
How long after the last button was pressed before the
KeyLinX becomes inactive and the button lights change to
the Inactive levels.
BackLight LED
Allows you to disable the backlight.
Service Name
A display field used to identify the stream name.
Carrier Frequency
Choose the IR frequency to be used. Selections are 30, 33,
36, 37, 38, 40, and 50.
KeyLinX Source Buttons
You can designate which Source button is assigned to what
source. For each KeyLinX Source button (Src1, Src2...), use
the dropdown list to designate what source that button
selects.
Download Firmware
If you need to download the latest version of firmware for the
KeyLinX, refer to Downloading KeyLinX Firmware on page
12-5.
Reset KeyLinX
If you need to reset the KeyLinX, refer to Resetting the
KeyLinX on page 12-6.