Finalizing device edits, Finalizing device edits -143, After adjusting information, select apply – ClearOne NetStreams DigiLinX Dealer User Manual
Page 213: When you’ve finished editing all devices, Select save project, Ip camera window
Editing Devices
5-143
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
3.
After adjusting information, select Apply.
Finalizing Device Edits
When you’ve finished editing all devices:
1.
Select Save Project.
2.
Select Continue.
You are prompted that you are about to send the configuration you just set up to all the live devices (see
Figure 5-122).
Table 5-100
IP Camera Window
Tab
Selection Description
IP Camera
Camera Name
Dealer-specified name for the camera.
Camera IP Address
IP address of the camera.
Camera Type
The model of camera being used.
NOTE:
This field automatically populates the rest of the fields
on this page.
Camera Image URL
For tech support use only.
Control URLs
For tech support use only.
Left
For tech support use only.
Right
For tech support use only.
Up
For tech support use only.
Down
For tech support use only.
Plus
For tech support use only.
Minus
For tech support use only.
Center
For tech support use only.
Camera Presets
These are presets for the selected Panasonic camera. You
can edit the URL by clicking on the preset and typing in the
appropriate address.