Skins, Skins interface, Chapter 14: skins -1 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 289: Skins interface -1
Skins
14-1
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Chapter
14
Skins
A skin allows you to change the appearance of the graphic interface. This allows you
to pick and choose a look that fits the room. There are two kinds of skins available:
Standard and Designer Skins.
A Standard skin provides the installer with a certain look and the ability to adjust the
colors of the selected skin.
Designer skins have a pre-determined look and lack the ability to do any
customization. The following sections show you how to apply skins to your interface.
Skins Interface
To access the Skins interface, complete the following steps:
1.
Open Dealer Setup (see Running DigiLinX Dealer Seup in Chapter 2.
2.
Open a project in Dealer Setup (see Opening a Project in Chapter 4).
NOTE:
You must have rooms added to the project before you can assign skins.
3.
Click on the Skins icon (
) in the Project area of the DigiLinX Dealer
Setup window.