ClearOne NetStreams DigiLinX Dealer - Manual (Page 264)

DigiLinX Dealer Setup Version 2.35.00
11-12
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
1. Turn On Movie Time of Service Lighting
2. Set Cool Set Point of HVAC’s Home Theater to 72
3. Sending Display On to Distributed Video
4. Set Active Off of All Audio Players
5. Set Active On of Home Theater Player
6. Change Source of Home Theater Player to DVD Player
7. Set Volume of Home Theater Player to 65
8. Send PLAY to DVD Player
Table 11-5 shows the dropdown selections chosen to create each macro step.
Macro Actions
The macro actions you can select send IR or RS232 commands to sources or ASCII
commands to DigiLinX devices. When sending a macro to a source, both IR and
RS-232 actions are available. You must select the appropriate action for how the
source is connected.
Audio Player Services
Actions selecting the source to play, indicating where to distribute the audio, and
adjusting audio settings such as the equalizer.
Table 11-5
Movie Time
Step Category Service Sub-service Action Parameter
1 Control Services Lighting Movie Time Turn On
2 Control Services HVAC Home Theater Set Cool Set Point 72
3 Control Services Distributed Video Display On
5 Audio Player Services All Audio Players Set Active Off
6 Audio Player Services Home Theater
Player Set Active On
7 Audio Player Services Home Theater
Player Change Source DVD Player
8 Audio Player Services Home Theater
Player Set Volume 65
9 Source Services DVD Player Play
Table 11-6
Audio Player Services Actions
Action Description
Cancel a MultiRoom Session End a multiroom session.
Change Source Set the source.