ClearOne NetStreams DigiLinX Dealer User Manual
Page 66
DigiLinX Dealer Setup Version 2.35.00
4-8
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Hosting Streams
The maximum number of
streams a media server can
support is dependent on two
things: the number of streams
the server supports and the
total number of MediaLinX’
and SpeakerLinX’ on the
DigiLinX network. All
streams must be hosted by a
MediaLinX or SpeakerLinX, so
for each stream there must be
a MedialinX or SpeakerLinX.
If the local Audio Port is set to
streaming, this requires the
SpeakerLinX to host that
stream.
For instance, if a media server
is delivering three streams and
two local Audio Ports are set
to streaming, five devices
(either SpeakerLinX or
MediaLinX MLA101) are
required to enable the stream
to support all five streams.
Figure 4-9
Auto Assignment Complete window
NOTE:
You can assign stream names from the Streams tab of the Media Server screen
(see Editing Media Servers in Chapter 5.
5.
Select Continue.
You are prompted to unplug the CAT5 cable to attached devices one at a time (see
Figure 4-10).