Controlinx and the generic lighting system, Controlinx and the generic lighting system -62 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 132
DigiLinX Dealer Setup Version 2.35.00
5-62
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
4.
Once all scenes have been added, use the up and down arrows located under the menu listing to adjust the
order the scenes are presented in.
5.
After adjusting information, select Apply.
ControLinX and the Generic Lighting System
To edit ControLinX settings for the generic lighting system, complete the following steps:
1.
Using the NetStreams RS232 cable (included with the ControLinX), connect the ControLinX to Vantage
through the RS232 (serial connection) on the Generic Lighting unit.
2.
Click on the ControLinX in the MediaLinX MLA4000 you want to edit in the project.
The IR/RS232 Settings tab for the ControLinX hosting a Generic Lighting system displays in the right side of
the window (see Figure 5-50).
Figure 5-52
Settings for the ControLinX hosting a Generic Lighting system tab
The IR/RS232 Settings tab is primarily an informational tab. The screen provides more detailed information
about the RS232 settings used to communicate with the GE Concord device.
Table 5-40 provides information on the fields available for editing the IR/RS232 Settings tab.
Table 5-39
Menu Tab
Tab
Selection Description
Menu
List of Rooms
Select the room from the list of rooms for the phantom
buttons.
Available Scenes
Select the scene and select the right arrow to move the
scene to the room.
The name of the room for which you are enabling scenes.