Running the design rules check function, Troubleshooting files and logs, Running the design rules check function -3 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 337: Troubleshooting files and logs -3
Troubleshooting
19-3
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Running the Design Rules Check Function
To run the Design Rules Check function, complete the following steps:
1.
Create a project file using the DigiLinX Dealer Setup Program.
2.
With the project open, select Tools>Design Rules Check.
A popup window displays showing any errors in your project file (see Figure 19-
2).
NOTE:
This example shows a duplicate service name error and an IP addressing
problem.
Figure 19-2
Design Rules Results Screen
3.
Note and fix any issues.
4.
Rerun the Design Rules Check function until you have cleared all errors.
Troubleshooting Files and Logs
When you want to report a problem to NetStreams Tech Support, please send the
following files and logs:
A description of the problem