Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 80)

Field Operation Key Presses
Yield Monitor 2000
Ag Leader Technology
June 1997
4-16
Bushels Total Dry Bushels.
•
Press the DRY GRAIN key until “xxxx D BU” appears on the display to
see total dry bushels.
•
Press the FIELD key to display the field alone on the top line to see total
dry bushels for a field only.
•
Press the LOAD key to display the field and load to see total dry bushels
for a load only.
•
If you press the DRY GRAIN key while you have the data load
displayed when you are harvesting, you can see the bushels being added.
Total Wet Bushels.
•
Press the WET GRAIN key until “xxxx W BU” appears on the display to
see the total wet bushels.
•
Press the FIELD key to display the field alone on the top line to see the
total wet bushels for a field only.
•
Press the LOAD key to display the field and load to see the total wet
bushels for a load only.
•
If you press the WET GRAIN key while you have the data load
displayed when you are harvesting, you can see the bushels being added.
Weight
•
Press the WEIGHT key until “xxxxxx LB” appears on the display to see
the total grain weight in pounds. This is the “wet” pounds of grain.
•
Press the FIELD key to display the field alone on the top line to see the
total pounds for a field only.
•
Press the LOAD key to display the field and load to see the total weight
for a load only.
•
If you press the WEIGHT key while the data load is displayed when you
are harvesting, you can see the weight in pounds being added.
•
If you entered an actual weight for a load, you can see the weight you
entered and the calibration error for that load by pressing the WEIGHT
key.