Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 77)

Yield Monitor 2000
Starting, Changing, Naming
Ag Leader Technology Fields/Loads
June 1997
4-13
Follow these steps to make a preexisting load the data load:
Step Action
1 Press the FIELD key.
2 Use the top UP or DOWN ARROW keys to scroll to the field you
want as the data field.
3 Press the LOAD key.
4 Use the top UP or DOWN ARROW keys to scroll to the load you
want as the data load.
5 Press the MEM key until “CHANGE TO THIS LOAD?” appears
on the display.
6 Press the YES key.
These steps are another way to make a preexisting load a data load:
Step Action
1 With the separator disengaged, set the monitor on the load you want
to change to the data load.
2 Engage the separator; “CHANGE TO THIS LOAD?” appears on
the display.
3 Press the YES key.
Naming Fields and Follow these steps to name a field.
Loads using the
Monitor
Step Action
1. Press the FIELD key and use the top UP or DOWN ARROW keys
to change to a field to be named.
2. Press the RIGHT ARROW key to move the cursor (underline) one
space to the right.
3. Press the UP or DOWN ARROW key to scroll to the character
you want to use.
Note: The available characters are the alphabet, numbers and
various symbols.
4. Repeat steps 2-3. The name can be eight characters long.