Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 36)

Copying Memory to Backup
Yield Monitor 2000
Ag Leader Technology
June 1997
2-32
Copy Memory to
Backup Once you have finished setting up the monitor you should backup the
settings in the main memory to the backup memory. When you start
harvesting you should back up the monitor at lease once a day. Refer to the
procedures below.
Step Action
1 Press the MEM key until “COPY MEMORY TO BACKUP?” is
displayed.
2 Press YES key.
- or-
3 Shut the monitor off and “COPY MEMORY TO BACKUP
BEFORE POWER OFF?” is displayed.
4 Press YES key.
Calibrating
Distance,
Temperature and
for Vibration You should put the monitor back in the cab if you have not already done so
and refer to the Calibration Section and calibrate for distance, temperature
and vibration to complete the setup of the monitor. You can not calibrate
for moisture or grain weight until you start harvesting.
* * *