Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 133)

Yield Monitor 2000
Checking Data Accuracy-
Ag Leader Technology End of Season
June 1997
4-67
Updating Field
Maps If you are using a GPS receiver and memory cards, press the MEM key and
copy memory to a card one last time to apply the final calibration and other
settings to the GPS yield data.
Note: Erase and format the memory card as follows before copying to the
card:
Step Action
1 Turn the monitor off with it set to log to a card.
2 Insert a card and turn the monitor on.
3 Press the YES key when prompted to erase and format the card.
Read this card into Precision Map 2000. Print the maps for each field.
Recommendation: If you previously printed field maps but made large
changes to your data at the end of the season (particularly calibration
changes), print the maps again with the new data to ensure your maps are
accurate.
Do not erase your fields until the next harvest season or until spring if you
use your monitor with a sprayer or planting controller.
* * *