Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 79)

Yield Monitor 2000
Field Operation Key Presses
Ag Leader Technology
June 1997
4-15
Introduction This document provides instructions for monitor keys you can press to
display useful information as you harvest.
Yield
•
Press the INST YIELD key to display the instantaneous dry yield in
bu/ac while you are harvesting. The monitor displays a new
instantaneous bu/ac yield reading every one second.
•
Press the AVG YIELD key to display the average dry yield in bu/ac for
either the field or the load, depending on which is displayed on the
monitor.
If you are not harvesting and you press the INST YIELD key, the average
dry yield in bu/ac appears the same as pressing the AVG YIELD key. Thus,
when you are displaying instantaneous yield and you arrive at the end of a
row and turn around, the instantaneous yield switches to the average yield of
the displayed load until you turn around to begin a new pass.
If you press the INST YIELD key twice you will display “xxx MAX
BU/AC”. This is the maximum dry bu/ac yield reading that the monitor
recorded for a 10-second period for either the field or the load, depending on
which you have displayed.
Moisture Press the MOIST key to display “xx.x%” while you harvest. The monitor
displays a new instantaneous moisture reading every one second. If you are
not harvesting and you press the MOIST key, the average moisture for the
field or load appears on the display. Therefore, when you are displaying the
instantaneous moisture and you arrive at the end of a row and turn around,
the instantaneous moisture switches to the average moisture of the displayed
load until you turn around to begin a new pass.
Refer to the Moisture document in this section for instructions about further
settings related to moisture readings. Refer to the Calibration section for
instructions about calibrating moisture.