Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 150)

Site Verification Setup
Yield Monitor 2000
Ag Leader Technology
June 1997
5-14
Calibrating
Distance If the monitor is connecting to a radar speed sensor, you must calibrate the
monitor to obtain correct distance and ground speed. If you have a radar
speed sensor on your combine and you want to keep the calibration for the
combine radar, calibrate the tractor radar gun using SPD=TRK (press the
DIST key) on the monitor. Refer to the Distance document in the
Calibration section for more information.
Grain Type Set the grain type to the type of grain that will be planted in the field. Refer
to the Grain Type document in the Operation section for more information.
* * *