Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 30)

Starting, Naming Fields, Loads
Yield Monitor 2000
Ag Leader Technology
June 1997
2-26
On computer press… To…
F Display Field
L Display Load
U Increase Field or Load
D Decrease Field or Load
GU Increase Grain Type
GD Decrease Grain Type
Y Answer Yes to question
N Answer No to question
Follow the procedures below to start and name fields and loads and to select
a grain type for each field from the computer.
Step Action
1 With the monitor set “READY TO PRINT” and “Type PRINT,
NAME, or START & press Enter” displayed on the computer, press
the F key on the computer and press the Enter key. This will
display a field and its grain type on the monitor.
2 To change to the field or to create the field you want to name, press
the U key to increase or the D key to decrease the field number and
press the Enter key.
When you increase the field to a field that has not been created yet,
the monitor will display “START NEW FIELD?”. Press the Y key
on the computer and press the Enter key. Refer to step 3 to change
the grain type.