Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 16)

Logging Settings
Yield Monitor 2000
Ag Leader Technology
June 1997
2-12
Setting a Logging
Interval To set a logging interval, press the SETUP key until “1 or 2 or 3 SEC
LOGGING INTERVAL” is displayed. Use the top UP or DOWN ARROW
keys to select 1, 2, or 3.
If you are . . . Then . . .
Not logging data to a
memory card, Ignore this selection.
Logging data to a card, This setting determines how often the yield and
GPS information is saved to the card. It also
affects how large an area each GPS record will
represent on a map and how many hours can be
logged to a memory card before it is full.
The recommended setting is either two or three seconds. A 1-second logging
interval probably will record more yield points than you need for yield
mapping purposes.
Example:
Distance Traveled (ft)
1 sec 2 sec 3 sec
3 mph 4.4 8.8 13.2
5 mph 7.3 14.6 21.9
Also, a longer logging interval will allow you to log more hours of data to a
memory card. Refer to the table below to compare card space and logging
intervals:
Logging Hours Available/Logging Interval
1 sec 2 sec 3 sec
.5 M Card 6.7 13.5 20.3
1 M Card 15.7 31.5 47.3
2 M Card 33.8 67.6 101.4
4 M Card 69.8 139.7 209.5