Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 105)

Yield Monitor 2000
Logging Map Data to a Card
Ag Leader Technology
June 1997
4-39
Follow this process if you decide to reformat and reinitialize the card.
Stage Description
1 When you press the YES key to answer “SAME CARD ERASE
AND INITIALIZE?”, the monitor warns you that you will lose the
data on the card if you continue. Press the YES key to continue.
2 The message “CARD NEEDS FORMATTED FORMAT AND
COPY TO CARD?” appears on the display. Press the YES key to
format the card.
3 The monitor then checks the card battery, determines the card size,
and checks the card memory to determine whether it is good.
4 After the monitor finishes formatting the card, the message “x.x M
CARD READY TO LOG PRESS A KEY TO CONTINUE”
appears on the display.
Different Card When you insert a card that is different from the last card used in the
monitor, “DIFFERENT CARD USE THIS CARD?” appears on the display.
Press the:
•
NO key if you do not want to use this card.
•
YES key to continue formatting/initializing. The message “PRESS YES
TO ERASE CARD PRESS NO TO ADD TO CARD” appears on the
display
Notes:
•
Press the YES key if you want to erase the card and begin filling the
card from the beginning.
•
Press the NO key if you want to add to the yield data that is already
on the card or press the NO key if you have not copied the data from
the card onto a computer. If you press the YES key, that data will be
erased.