Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 65)

Yield Monitor 2000
Operation Overview
Ag Leader Technology
June 1997
4-1
Important Notices The yield monitor must be calibrated so that it provides accurate yield
information. Carefully read and follow the directions in the calibration
section of the manual.
Because you will keep an entire harvest season’s records in the monitor’s
memory, you should back up the monitor’s memory at least once a day.
When you turn off the monitor, press the YES key when the message
“COPY MEMORY TO BACKUP OR PRESS NO?” appears on the display.
You can back up the memory more frequently. Press the MEM key until
“COPY MEMORY TO BACKUP?” appears on the display, then press the
YES key.
Section Contents The following subjects are detailed in this section:
Subject Page
General Description 4-2
Starting, Changing, Naming Fields/Loads 4-11
Field Operation Key Presses 4-15
Swath Setting 4-19
Setting Moisture 4-22
Acre Counting 4-23
Grain Type 4-26
Memory 4-28
Clearing Fields/Loads 4-31
Logging Map Data to a Card 4-34
Logging Map Data to a Datalogger 4-43
Using a GPS Receiver 4-44
Using a Radar Speed Sensor 4-47
Printing Field/Load Summary 4-49
Checking Data Accuracy 4-64
Changing the Monitor’s Program Chip 4-68
* * *