Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 76)

Starting, Changing, Naming
Yield Monitor 2000
Fields/Loads Ag Leader Technology
June 1997
4-12
Follow these steps to start or change the load:
Step Action
1 Press the LOAD key to display the field and field on the top line of
the display.
2 Use the top UP or DOWN ARROW keys to change to another load.
Note: When you display the field and load on the top line, the yield
information on the bottom line is for load totals.
3. To start a new load, on the last load press the UP ARROW key to
get “START NEW LOAD?”.
4. Press the YES key.
Changing Data
Loads You can use two different methods to change to a different data load:
•
Start a new load
•
Make a preexisting load the data load
Note: You can change data loads without stopping the separator using both
methods above.
Follow these procedures if you do not know which field the current data
load is in:
Step Action
1 Press the FIELD key.
2 Use the top UP or DOWN ARROW keys to scroll through the
fields until you find the field that has an arrow to the right of the
field number (example: F7->).
3 Press the LOAD key.
4 Use the top UP or DOWN ARROW keys to scroll through the
loads in that field until you find the load that has an arrow to the
right of the load number (example: F7-> L8->).
If you start a new load, that load automatically becomes the new data load.
Follow these steps to start a new load:
Step Action
1 Press the LOAD key.
2 Use the top UP ARROW key to scroll through all the loads. When
you scroll past the last load in that field, the message “START
NEW LOAD?” appears on the display. Press the YES key.