Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 21)

Yield Monitor 2000
Setting Swath
Ag Leader Technology
June 1997
2-17
Setting Swath Follow these procedures to set the swath.
Note: The number of rows and row space needs to be set for each grain
type. The monitor calculates swath by multiplying the number of rows by
row space.
Step Action
1 Press the GRAIN key and use the bottom-left UP or DOWN
ARROW keys to change to the grain type of which you want to set
the swath.
Note: You must have a load displayed to change the grain type.
2 Press the # ROWS key to display “x ROW CUT, x ROW HEAD”
for the selected grain type.
3 Use the RIGHT or LEFT ARROW keys to move the cursor under
the “Row Head” value. Use the top UP or DOWN ARROW keys to
set the Row Head value to the correct number of rows for the
selected grain type.
Note: The Row Head value is the permanent number of rows; do
not change it after it is set. The Row Cut value is used to calculate
acres, and it can be used to reduce the number of rows in partial
swath situations (point rows). Whenever you change the value for
the Row Head, the value for the Row Cut automatically adjusts to
equal the Row Head value.
4 Press the ROW SPACE key to display “x INCH ROWS” for the
selected grain type, then use the top UP or DOWN ARROW keys to
set the correct value.