Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 122)

Printing Field/Load Summary
Yield Monitor 2000
Ag Leader Technology
June 1997
4-56
Printing Field/Load
Summary Follow these steps to print the field/load summary:
(Windows 3.1) Step Action
1 Click on File on the menu bar.
2 Click on Print.
3 Click on OK if you want to print the entire summary.
Note: If you are not ready to print all the pages, click on Pages and
then select the page range that you want to print.
After you have printed the summary, review it for obvious errors in
calibration, naming fields and loads, etc. Refer to the instructions in the
Checking Data Accuracy document in this section for more information on
reviewing the data.
Windows 95
Introduction The HyperTerminal communications program and the WordPad word
processing program in Windows 95 are accessed by clicking on Start,
Programs, Accessories. HyperTerminal and WordPad are basic
communications and word processing programs, which you do not have to
use if you have equivalent software you want to use, such as Procomm for
communications and Microsoft Word and WordPerfect for word processing.
If you use other software, you should be able to follow the procedures given
below. Simply use the commands corresponding to those given for
HyperTerminal and WordPad.