Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 28)

Setting Initial Calibration
Yield Monitor 2000
Numbers Ag Leader Technology
June 1997
2-24
Step Action
9 Press the bottom-left UP or DOWN ARROW keys to change the
grain type displayed to another grain that you will harvest, then set
the calibration numbers for this grain type as described above.
10 Repeat Step 9 for every grain type you will harvest. When you
have set these values for every grain type, press the LOAD key to
display field and load on the top line, and set the grain type for this
field and load.
Copy Memory to
Backup To ensure that you do not lose the grain calibration settings, immediately
copy the memory to backup. Press the MEM key until “COPY MEMORY
TO BACKUP” appears on the top line of the display, then press the YES
key.
* * *