HP Hitachi Dynamic Link Manager Software - Manual (Page 95)

3. Creating an HDLM Environment
71
Note the following in an EM64T/AMD64 environment:
• HDLM supports an environment where an EM64T/AMD64 kernel is
installed on a system that uses an Intel CPU or AMD Opteron CPU.
• In an EM64T/AMD64 environment, the RPM (Red Hat Package Manager)
packages listed below are required. Install these RPM packages before
installing HDLM:
- libstdc++-RPM package version.i386.rpm
- libgcc-RPM package version.i386.rpm
- glibc-RPM package version.i686.rpm
RPM package version depends on the OS version you are using.
3.1.2 Storage Systems Supported by HDLM
The following shows the storage systems that HDLM supports.
(1) Storage Systems
The following storage systems are supported by HDLM:
If an FC-SAN is used:
• Hitachi AMS2000/AMS/WMS/SMS series
• Hitachi NSC55
• Hitachi TagmaStore Universal Storage Platform 100
• Hitachi TagmaStore Universal Storage Platform 600
• Hitachi TagmaStore Universal Storage Platform 1100
• Hitachi Universal Storage Platform V
• Hitachi Universal Storage Platform VM
• Hitachi Virtual Storage Platform
• HP StorageWorks P9500 Disk Array
• HP XP128/HP XP1024/HP XP10000/HP XP12000/HP XP20000/HP XP24000
• Lightning 9900 series
• Lightning 9900V series
• SVS
• Thunder 9500V series
If an IP-SAN is used:
• Hitachi AMS2000 series