HP Hitachi Dynamic Link Manager Software - Manual (Page 229)

3. Creating an HDLM Environment
205
/dev/sddlmaa1 /boot ext3 defaults 1 2
:
:
This example assumes that IA32 uses
GRUB
as the boot loader. When you use IPF
that uses
ELILO
as the boot loader, the mount point is displayed as
/boot/efi
instead of
/boot
in the line where
/boot
is coded, and the file system type is
displayed as
vfat
instead of
ext3
.
16. Edit the boot loader configuration file so that the OS will start with HDLM
specified.
Edit the boot loader configuration file as shown in Figure 3-12: Example of
Editing /etc/grub.conf file, Figure 3-13: Example of Editing /boot/grub/menu.lst
file (When using a kernel that supports Xen), and Figure 3-14: Example of
Editing /etc/elilo.conf file.
If you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, check the
/boot/grub/menu.lst
file instead of the
/etc/
grub.conf
file.
The detailed procedure is explained in steps 17 to 22.
Figure 3-12: Example of Editing /etc/grub.conf file, Figure 3-13: Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen), and
Figure 3-14: Example of Editing /etc/elilo.conf file show examples of editing the
configuration file.
Figure 3-12: Example of Editing /etc/grub.conf file
Edit the shaded portion.