HP Hitachi Dynamic Link Manager Software - Manual (Page 576)

8. Messages
552
aa...aa: Option definition file name
Action
Check whether another program is currently using this file (for example, the file
is being opened in a text editor), or whether the file has been inadvertently
deleted.
KAPL04009-E
The option definition is invalid.
Details
HDLM manager could not start normally because some of the definitions in the
option definition file were invalid.
Action
If the KAPL04033-W message is output after this message, execute the
dlnkmgr
view -sys -sfunc
command, and then check the option settings.
Use the
dlnkmgr set
operation to return options settings back to where you had
them.
If the KAPL04033-W message is not output, restart HDLM manager.
If the same error occurs, re-install HDLM. For details on the
view
operation, see
6.7 view (Displays Information). For details on the
set
operation, see 6.6 set
(Sets Up the Operating Environment).
KAPL04010-E
Could not open the error log file.
Details
HDLM manager cannot start normally (unable to open the error log file
/var/
opt/DynamicLinkManager/log/dlmmgr[1-16].log
).
Action
Check whether another program is using the file (for example, the file is being
opened in a text editor), or whether the error log file has been inadvertently
deleted.
KAPL04011-E
Could not output the error log file.
Details
The log information could not be output to the error log file
/var/opt/
DynamicLinkManager/log/dlmmgr[1-16].log
.
Action
Make sure that the disk has enough unused capacity.