HP Hitachi Dynamic Link Manager Software - Manual (Page 708)

8. Messages
684
8.15 Return Codes for Hitachi Command Suite Common Agent
Component
When an operation requested of HDLM from Global Link Manager terminates
abnormally, or terminates normally with a warning, HDLM outputs one of the return
codes described below.
1002
Details
There is no path on which the operation can be performed.
Action
Refresh the host information, check the path status, and then perform the
operation again.
1003
Details
No path was detected.
Action
Check whether a path between the host and the storage system is connected. If a
path is connected, check whether HDLM is configured correctly.
1004
Details
Memory required for HDLM internal processing could not be allocated.
Action
Terminate unnecessary applications to increase free memory, or restart the host.
1006
Details
An
Offline
path cannot be placed
Online
.
Action
Remove the error in the path, and then retry.
1007
Details
The target path of the offline operation is the last, remaining path connected to the
device and therefore, cannot be placed in the offline status.