HP Hitachi Dynamic Link Manager Software User Manual
Page 368
4. HDLM Operation
344
To display LU information, execute the
dlnkmgr
command's
view
operation with the
-lu
parameter specified. The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : 9500V
SerialNumber : 0115
LUs : 5
iLU HDevName Device PathID Status
0000 sddlmac /dev/sds 000002 Online
/dev/sdd 000007 Online
/dev/sdi 000012 Online
/dev/sdn 000017 Online
0001 sddlmad /dev/sdt 000003 Online
/dev/sde 000008 Online
/dev/sdj 000013 Online
/dev/sdo 000018 Online
0002 sddlmae /dev/sdu 000004 Online
/dev/sdf 000009 Online
/dev/sdk 000014 Online
/dev/sdp 000019 Online
0003 sddlmaa /dev/sdq 000000 Online
/dev/sdv 000005 Online
/dev/sdg 000010 Online
/dev/sdl 000015 Online
0004 sddlmab /dev/sdr 000001 Online
/dev/sdw 000006 Online
/dev/sdh 000011 Online
/dev/sdm 000016 Online
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see 6.7 view (Displays
Information).
4.3.5 Displaying Corresponding Information About an HDLM Device,
SCSI Device, and LDEV
This subsection explains how to display corresponding information about an HDLM
device, SCSI device, and LDEV by using an HDLM command.
You can display corresponding information about an HDLM device, SCSI device, and
LDEV by executing the
dlnkmgr
command's
view
operation with the
-drv
parameter specified. For details on the
view
operation, see 6.7 view (Displays
Information). The execution result of this operation is displayed on a single line for
each path.