HP Hitachi Dynamic Link Manager Software User Manual
Page 596
8. Messages
572
8.8 KAPL08001 to KAPL09000
KAPL08019-E
The path (
aa...aa
) detected an error (
bb...bb
). (
cc...cc
)
Details
An error occurred in the path. The error is most likely due to a disconnected cable.
aa...aa: Path identifier (hexadecimal number)
bb...bb: Error code (hexadecimal number)
• When a path error is detected by a path health checking or the online
operation
Displays 0x000F0000 (Fixed).
• When a path error is detected through an I/O error
Displays the OS error code.
cc...cc: 0x00000000 (fixed)
Action
Check the path in which the error was detected.
KAPL08022-E
A path error occurred. ErrorCode =
aa...aa
, PathID =
bb...bb
,
PathName =
cc...cc
.
dd...dd
.
ee...ee.ff...ff
, DNum =
gg...gg
, HDevName =
hh...hh
Details
A physical or logical error occurred in the path.
aa...aa: OS error code (hexadecimal number)
• When a path error is detected by a path health checking or the online
operation
Displays 0x000F0000 (Fixed).
• When a path error is detected through an I/O error
Displays the OS error code.
bb...bb: Path ID (same as PathID of
view
-path
) (decimal (base-10) number)
cc...cc: Host port number (same as PathName of
view -path
) (hexadecimal
number)
dd...dd: Bus number (same as PathName of
view -path
) (hexadecimal number)