HP Hitachi Dynamic Link Manager Software User Manual
Page 639
8. Messages
615
KAPL10322-E
A file that defines HDLM-unmanaged disks could not be created.
File name =
aa...aa
, Errno =
bb...bb
. Execute the DLMgetras utility
to collect error information, and then contact your vendor or
maintenance company.
Details
Execution of the HDLM-configuration definition utility (
dlmcfgmgr
) failed
because an exclusion disk definition file (aa...aa) could not be created.
aa...aa: File name
bb...bb: Error number (decimal number)
Action
Execute the
DLMgetras
utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM.
For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
HDLM Error Information.
KAPL10323-E
The registration of the block device driver for HDLM failed. All
dynamic major numbers are exhausted. Unload (remove from the
kernel) an unnecessary driver, and then execute the dlmcfgmgr
utility again.
Details
Registration of the block device driver of HDLM failed because all dynamic
major numbers were used.
Action
Unload (remove from the kernel) any unnecessary driver, and then re-execute the
HDLM-configuration definition utility (
dlmcfgmgr
). For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM
Configuration.
KAPL10324-I
The device configuration of the system has changed. Device =
aa...aa
Details
The device composition of a system to a device (aa...aa) was changed.
aa...aa: HDLM device name
Action