HP Hitachi Dynamic Link Manager Software - Manual (Page 191)

3. Creating an HDLM Environment
167
Note 2
To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as the
mount point noted above. If the file permissions or the directory structure
differs, HDLM cannot be installed.
#
This refers to the volume name for the CD-ROM or other media, formatted
for ISO-9660 file systems. Use the
volname
command to check
media-volume-id.
The following shows an execution example for when media-volume-id is
VOL01234
.
# volname /dev/cdrom
VOL01234
#
4. Check the version of HDLM.
Execute
installux.sh
or the HDLM installation utility (
installhdlm
) stored
on the HDLM DVD-ROM to check the version of HDLM that will be installed.
The following example shows how to execute the command when the mount
point for the DVD-ROM is
/media/cdrom
:
• When executing
installux.sh
# /media/cdrom/installux.sh -v
• When executing the
installhdlm
utility
# /media/cdrom/HDLM_Linux/installhdlm -v
A command execution example is described below. x.x.x-xx is the version of
HDLM.
KAPL09177-I HDLM version:
x.x.x-xx
5. Create an installation information settings file.