HP Hitachi Dynamic Link Manager Software - Manual (Page 539)

7. Utility Reference
515
KAPL09228-W message is output.
(2) Items To Be Defined in an Installation-Information Settings File
The following describes the information defined in the installation information
settings file.
[INSTALLATION_SETTINGS] section
This section defines information that is used when the
installhdlm
utility is
executed. Specify this section name at the beginning of the installation information
settings file (although an empty paragraph or comment line can be inserted above this
section name).
Table 7-11: Keys in the [INSTALLATION_SETTINGS] Section lists the keys defined
in the
[INSTALLATION_SETTINGS]
section.
Table 7-11: Keys in the [INSTALLATION_SETTINGS] Section
Key name Description Necessity of definition Maxim
um
numbe
r of
charac
ters
New
installatio
n
Upgrade
installatio
n or
re-install
ation
licensekeyfile
#1
Specify the absolute path name of a license key
file that is provided in
*.plk
format.
The default is
/var/tmp/hdlm_license
.
If you perform an upgrade installation or
re-installation without updating the license,
delete the
licensekeyfile
key and value.
Optional #2 Optional #2 1024
licensekey
#1 Specify the absolute path name of a license key
file that was created by using the following
command:
# echo "
license-key
" > "
license-key-file
"
The default is
/etc/opt/
DynamicLinkManager/dlm.lic_key
.
If you perform an upgrade installation or
re-installation without updating the license,
delete the
licensekey
key and value.
Optional #2 Optional #2 1024
driver_config
Specify either of the following values to indicate
whether to load the HDLM driver and configure
the HDLM device:
y
: Load the HDLM driver and configure the
HDLM device (default).
n
: Do not load the HDLM driver and configure
the HDLM device.
Optional Optional 1