HP Hitachi Dynamic Link Manager Software - Manual (Page 669)

8. Messages
645
Action
If the file name displayed in the message is the file name specified in the
fstab
parameter of the Boot Disk Support Utility (
dlmmkinitrd
)
Check the specified file name, specify the file name of the existing fstab file,
and then re-execute the utility.
If the file name displayed in the message is the HDLM file name shown
below, HDLM may not be installed correctly. In this situation, re-install
HDLM.
If Red Hat Enterprise Linux 5 or Red Hat Enterprise Linux 6 is being used,
replace
/lib/modules/
kernel-release-number
/kernel/drivers/
DynamicLinkManager/
with the following:
• When Red Hat Enterprise Linux 5 is being used
/lib/modules/2.6.18-
xxx
/extra/hitachi/
DynamicLinkManager
• When Red Hat Enterprise Linux 6 is being used
/lib/modules/2.6.32-
xxx
/extra/hitachi/
DynamicLinkManager
In the list shown below, kernel-version indicates the value displayed by the
uname -r
command.
•
/etc/opt/DynamicLinkManager/dlmmkinitrd.conf
•
/lib/modules/
kernel-version
/kernel/drivers/
DynamicLinkManager/sddlmfdrv.o
•
/lib/modules/
kernel-version
/kernel/drivers/
DynamicLinkManager/sddlmfdrv.ko
•
/lib/modules/
kernel-version
/kernel/drivers/
DynamicLinkManager/sddlmadrv.o
•
/lib/modules/
kernel-version
/kernel/drivers/
DynamicLinkManager/sddlmadrv.ko
If the file name displayed in the message is another file name
The OS (kernel) or the HBA driver may not be installed correctly. Confirm
sure the existence of the files.
KAPL12305-I
The utility for supporting the boot disk was stopped by the user.
Action
Retry the
dlmmkinitrd
utility for supporting the boot disk.