HP Hitachi Dynamic Link Manager Software User Manual
Page 641
8. Messages
617
KAPL10328-E
The entered value is invalid. The HDLM-configuration definition
utility processing will now stop. Execute the HDLM-configuration
definition utility again.
Details
An invalid value was entered 3 or more times for the message confirming the
execution of the HDLM-configuration definition utility (
dlmcfgmgr
).
Processing is interrupted.
Action
Re-execute the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
utility, see
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10329-E
A file could not be opened. File name =
aa...aa
, Errno =
bb...bb
.
Refer to the Messages section of the HDLM User's Guide for
instructions to correct this problem.
Details
The file could not be opened.
aa...aa: File name
bb...bb: Error number (decimal number)
Action
Confirm the existence of the file. If there is no problem, and then execute the
DLMgetras
utility for collecting HDLM error information, and then contact your
HDLM vendor or the maintenance company if there is a maintenance contract for
HDLM.
For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
HDLM Error Information.
KAPL10330-E
A symbolic link cannot be created. File name =
aa...aa
, Errno =
bb...bb
. Execute the DLMgetras utility to collect error
information, and then contact your vendor or maintenance
company.
Details
An attempt to create a symbolic link has failed.
aa...aa: File name
bb...bb: Error number (decimal number)
Action