HP Hitachi Dynamic Link Manager Software - Manual (Page 342)

3. Creating an HDLM Environment
318
installation.
7. Edit the boot loader configuration file for SCSI startup.
If you are using SUSE LINUX Enterprise Server 10, check the
/boot/grub/
menu.lst
file instead of the
/etc/grub.conf
file.
The detailed procedure is explained in steps 8 to 11.
Separate examples are provided for when the boot loader is LILO, when the boot
loader is GRUB, when the boot loader is ELILO running on an IPF host, and
when LVM2 is used.
Note that option in the example of editing a setting file refers to any option that
might be valid in the user's environment.
• When the boot loader is LILO
An example of editing the
/etc/lilo.conf
file (the underlined section) is
shown below.
After modifying the definition, execute
/sbin/lilo
command to activate
the new setting. You can delete the configuration for specifying the HDLM
device without causing any problems.
boot=/dev/sda
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
linear
#default=HDLM_194.EL
default=linux
image=/boot/vmlinuz-2.6.18-194.el5
label=HDLM_194.EL
initrd=/boot/initrd-hdlm-2.6.18-194.el5.gz
read-only
append="
option
ramdisk_size=18245
option
"