HP Hitachi Dynamic Link Manager Software - Manual (Page 485)

6. Command Reference
461
To display corresponding information about an HDLM device, SCSI device, and
LDEV
# /opt/DynamicLinkManager/bin/dlnkmgr view -drv
PathID HDevName Device LDEV
000000 sddlmaa /dev/sdag 9970/9980.15001.05B7
000001 sddlmaa /dev/sdq 9970/9980.15001.05B7
000002 sddlmab /dev/sdr 9970/9980.15001.05B0
000003 sddlmac /dev/sds 9970/9980.15001.05B1
000004 sddlmad - 9970/9980.15001.05B2
000005 sddlmae /dev/sdu 9970/9980.15001.05B3
000006 sddlmaf /dev/sdv 9970/9980.15001.05B4
000007 sddlmag /dev/sdw 9970/9980.15001.05B5
000008 sddlmah /dev/sdx 9970/9980.15001.05B6
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
(5) To display the format of the view operation
-help
Use this parameter to display the
view
operation format.
Example
The following example shows how to display the format of the
view
operation.
# /opt/DynamicLinkManager/bin/dlnkmgr view -help
view:
Format
dlnkmgr view -sys [ -sfunc | -msrv | -adrv | -pdrv | -lic | -audlog
| -lbpathusetimes ] [-t]
dlnkmgr view -path [ -hdev HostDeviceName ] [-stname] [-iem]
[-srt {pn | lu | cp}] [-hbaportwwn] [-t]
dlnkmgr view -path
-item [pn] [dn] [lu] [cp] [type] [ic] [ie] [dnu]
[hd] [iep] [hbaportwwn]
[-hdev HostDeviceName] [-stname] [-srt {pn | lu | cp}] [-t]
dlnkmgr view -path -c [-stname] [-srt {lu | cp}] [-t]