HP Hitachi Dynamic Link Manager Software - Manual (Page 323)

3. Creating an HDLM Environment
299
Figure 3-37: Device Configuration When a Logical Volume on an HDLM
Device Is Moved to a SCSI Device
In Figure 3-37: Device Configuration When a Logical Volume on an HDLM Device
Is Moved to a SCSI Device,
sda1
,
sdb1
,
sdc1
, and
sdd1
indicate the same LU.
Likewise,
sda2
,
sdb2
,
sdc2
, and
sdd2
indicate the same LU.
sddlmaa1
and
sddlmaa2
indicate the HDLM devices corresponding to each LU.
To move the logical volume to a SCSI device:
1.
Stop all processes and services that are using the SCSI and HDLM devices.
2. Unmount the logical volume to be moved.
In the following example, the logical volume subject to the move has been
mounted on
/mnt/lvol1
:
# umount /mnt/lvol1
3. Deactivate the volume group.
In the following example, the logical volume to be moved belongs to the
vg01
volume group: