HP Hitachi Dynamic Link Manager Software - Manual (Page 237)

3. Creating an HDLM Environment
213
Figure 3-15: Example of Editing /etc/lvm/lvm.conf file
Comment out the existing
filter
and
types
lines, and add the shaded lines in
the figure.
In addition, set
md_component_detection
to its original value before
installation.
8. Edit the boot loader configuration file so that the OS will start with a SCSI device
specified.
Edit the boot loader configuration file as shown in Figure 3-16: Example of
Editing /etc/grub.conf file, Figure 3-17: Example of Editing /boot/grub/menu.lst
file (When using a kernel that supports Xen), and Figure 3-18: Example of
Editing /etc/elilo.conf file.
If you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, check the
/boot/grub/menu.lst
file instead of the
/etc/
grub.conf
file.
The detailed procedure is explained in steps 9 to 12.
Figure 3-16: Example of Editing /etc/grub.conf file, Figure 3-17: Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen), and
Figure 3-18: Example of Editing /etc/elilo.conf file show examples of editing the
configuration file.