HP Hitachi Dynamic Link Manager Software - Manual (Page 673)

8. Messages
649
aa...aa: The name of the module whose insertion has failed
Action
Confirm that the system environments are not changed after creating the initial
ramdisk image file.
Check whether there is a mistake in the initial ramdisk image file specified in the
config file of the boot loader.
KAPL12325-I
The command started. Command name =
aa...aa
Details
aa...aa: The started command
Action
None.
KAPL12326-E
The command could not execute. Command name =
aa...aa
Details
aa...aa: The failed command
Action
Perform the following confirmation corresponding to the output command, and
then retry.
Re-execute the
dlmmkinitrd
utility for supporting the boot disk after
performing the next check according to the outputted command.
And if the error message is outputted before this message, remove the cause of the
error with reference to the contents of the message.
cp
:
Confirm that there is enough unused capacity and that the user has write
permission in the root directory (
/
).
cpio
or
dd
:
Confirm that there is enough unused capacity and that the user has write
permission in the
/etc/opt/DynamicLinkManager
directory.
dlmcfgmgr
:
• Confirm that the version of the OS has not changed since you made the
initial ramdisk image file.
• Take action according to the contents output in the log of the