HP Hitachi Dynamic Link Manager Software - Manual (Page 441)

6. Command Reference
417
Operation name = set, completion time = yyyy/mm/dd
hh:mm:ss
#
-elfs
error-log-file-size
Specify a value from 100 to 2,000,000 (in KB) for the size of the error log files
(
dlmmgr
n
.log
(n indicates a file number from
1
to
16
)). The specified files size
is applied to HDLM manager logs.
By specifying both the error log file size and the number of error log files, you
can collect up to 32,000,000 KB (approximately 30 GB) of error logs in total.
When the size of all the log files in a log file group reaches their maximum value,
the new log data will overwrite the existing log data, starting with the oldest log
data.
-elfn
number-of-error-log-files
Specify the number of error log files (
dlmmgr
n
.log
(n indicates a file number
from
1
to
16
)). Specify a value from
2
to
16
.
By specifying both the error log file size and the number of error log files, you
can collect up to 32,000,000 KB (approximately 30 GB) of error logs in total.
-systflv
trace-level
Specify the trace output level.
Log files for which the trace level can be set are
hdlmtr
n
.log
(where n is a value
from 1 to 64).
Table 6-4: Trace Level Values shows the values of the trace level. When an error
occurs, we recommend that you set the value of the trace level to
1
or higher and
re-collect log information.
Table 6-4: Trace Level Values
The higher the error log collection level value, the more log information will be
output. As the amount of log information that is output increases, the amount of
Value Description
0
Does not output any trace.
1
Only outputs error information.
2
Outputs a summary of program operation.
3
Outputs details of program operation.
4
Outputs all information.