HP Hitachi Dynamic Link Manager Software - Manual (Page 203)

3. Creating an HDLM Environment
179
root (hd0,0)
kernel /vmlinuz-2.6.16.60-0.54.5-smp root=/dev/VG/
root vga=0x31a \
resume=/dev/VG/swap splash=silent showopts
multipath=off
initrd /initrd-2.6.16.60-0.54.5-smp
multipath=off
is set in the underlined section.
3. Check the definition in the
/etc/fstab
file.
Check whether
LABEL
is used in the
/etc/fstab
file. If the file contains
LABEL=
xxxxx,
LABEL
is being used.
For Red Hat Enterprise Linux 6, also check whether the block device names
(
udev
names) starting with
UUID=
are specified as shown in the following
underlined parts:
UUID=55574d05-07dc-4c94-a585-5599c284d79b / ext4
defaults 1 1
UUID=33ef8ca1-595a-4fbf-8567-76f70760d743 /boot ext4
defaults 1 2
:
:
If the OS is SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, also check whether the device names (
udev
names) starting with the
/
dev/disk
directory are specified as shown in the following underlined parts:
/dev/disk/by-id/scsi-1HITACHI_D60H03750019-part2 swap swap
defaults 0 0
/dev/disk/by-id/scsi-1HITACHI_D60H03750019-part3 / ext3
acl,user_xattr 1 1
:
:
4. Check the definition in the boot loader configuration file.
Check whether
LABEL
is used in the definition in the boot loader configuration
file. The following shows examples for
LABEL
.
• When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see 3.1.1 Hosts and OSs
Supported by HDLM.