HP Hitachi Dynamic Link Manager Software User Manual
Page 680

8. Messages
656
Wait until the executing utility finishes, and then re-execute
dlmsetopt
.
If two or more utilities are not executing simultaneously, delete the following
files, and then re-execute the utility:
/etc/opt/DynamicLinkManager/.dlm_modules.conf.lock
KAPL12553-W
Usage: /opt/DynamicLinkManager/bin/dlmsetopt {-r retrycount |
-inqt InquiryTimeout | -inqr InquiryRetry | -h}
Action
Refer to 7.6 dlmsetopt Utility for Setting HDLM Driver Options, and then
specifying the correct argument. Then, re-execute the
dlmsetopt
utility.
KAPL12554-I
The utility for setting HDLM driver option has started.
Action
None.
KAPL12555-I
The utility for setting HDLM driver option completed normally.
Action
None.
KAPL12556-I
An attempt to execute the utility for setting HDLM driver option
has failed.
Action
Check the action recommended in the error message output before this message,
and take action accordingly.
KAPL12557-I
The user stopped the utility for setting HDLM driver option.
Details
Even if the message KAPL12555-I is output before this message, the contents set
by the execution of the
dlmsetopt
utility will have no effect and the settings will
return to the state before the execution.
Action
If necessary, re-execute the
dlmsetopt
utility.
KAPL12558-I
Please restart the computer so that the option settings take
effect.