HP Hitachi Dynamic Link Manager Software User Manual
Page 635
8. Messages
611
Managing the HDLM Configuration.
KAPL10302-I
/sbin/dlmcfgmgr completed normally.
Details
The HDLM-configuration definition utility (
dlmcfgmgr
) has completed
successfully.
Action
None. For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
Managing the HDLM Configuration.
KAPL10305-E
A special file could not be created. Filename =
aa...aa
. Execute
the DLMgetras utility to collect error information, and then
contact your vendor or maintenance company.
Details
A logical device file for an HDLM device cannot be created.
aa...aa: Logical device file name of HDLM device
Action
Execute the
DLMgetras
utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM. For details on the
DLMgetras
utility, see 7.2 DLMgetras
Utility for Collecting HDLM Error Information.
KAPL10306-W
The configuration definition file is invalid. Refer to the
Messages section of the HDLM User's Guide for instructions to
correct this problem.
Details
The configuration definition file (
/etc/opt/DynamicLinkManager/
.dlmfdrv.conf
) is invalid.
Action
/etc/opt/DynamicLinkManager/.dlmfdrv.conf
to an alias name and
restart the host. The logical device file name of the HDLM device might be
changed, so that after the host restarts, check the logical device file name. If the
logical device file name was changed, modify the path to the upper-level program.
KAPL10308-W
The configuration definition file could not be created. Execute
the DLMgetras utility to collect error information, and then
contact your vendor or maintenance company.