HP Hitachi Dynamic Link Manager Software - Manual (Page 648)

8. Messages
624
aa...aa: Logical device file name of HDLM device
Action
None. For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
Managing the HDLM Configuration.
KAPL10350-E
The HDLM driver(s) is not loaded. Refer to the Messages section
of the HDLM User's Guide for instructions to correct this
problem.
Details
An attempt to execute the HDLM-configuration definition utility (
dlmcfgmgr
)
failed because the HDLM driver was not loaded.
Action
Carry out the following process:
1.
Execute the following command to load the HDLM driver
# /opt/DynamicLinkManager/bin/dlminsadrv
# modprobe sddlmfdrv
2. Re-execute the
dlmcfgmgr
utility.
For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
Managing the HDLM Configuration.
KAPL10351-E
The specified HDLM-configuration definition utility is invalid.
Operation name =
aa...aa
, Parameter =
bb...bb
Details
An attempt to execute the HDLM-configuration definition utility (
dlmcfgmgr
)
failed because the specified operation name (aa...aa:) or parameter (bb...bb) was
invalid.
aa...aa: Operation name
bb...bb: Parameter
Action
Confirm that the operation name and parameter are correct, and then re-execute
the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr
Utility for Managing the HDLM Configuration.