HP Hitachi Dynamic Link Manager Software - Manual (Page 271)

3. Creating an HDLM Environment
247
logical volume. Use the following procedure to configure the environment shown in
Figure 3-28: Device configuration When Creating a Logical Volume on an HDLM
Device.
Figure 3-28: Device configuration When Creating a Logical Volume on an
HDLM Device
To create a new logical volume on an HDLM device:
1.
Stop all processes and services that are using the HDLM device.
2. Create a disk partition on the HDLM device and change the system ID from
Linux
(
83
in hexadecimal representation) to
Linux LVM
(
8e
in hexadecimal
representation).
The following shows an example of how to create two partitions in
/dev/
sddlmad
(HDLM device):
Example of executing the
fdisk
command (IA32):