HP Hitachi Dynamic Link Manager Software - Manual (Page 364)

4. HDLM Operation
340
Perform step 1 to 15 in 3.7.4 Upgrade Installation in an Environment Where an
HDLM Device Is Used as a Boot Disk.
3. Update the kernel package or OS update package.
4. Execute the
dlmupdatesysinit
utility for updating system scripts.
For details about this utility, see 7.8 dlmupdatesysinit Utility for Updating System
Scripts.
5. Restart the host.
6. Specify the settings required for using an HDLM device as a boot disk.
Perform step 17 to 30 in 3.7.4 Upgrade Installation in an Environment Where an
HDLM Device Is Used as a Boot Disk.
4.2.3 Environment Where a Logical Volume (LVM2) on an HDLM
Device Is Used as the Boot Disk
To update a kernel package or apply an OS update package when a logical volume
(LVM2) on an HDLM device is used as the boot disk:
1.
Perform the procedure in 3.6.4 Performing a Re-installation of HDLM.
2. Edit the configuration file by changing the OS startup definition so that the OS
will start with a SCSI device specified.
Perform step 1 to 19 in 3.7.6 Upgrade Installation in an Environment Where a
Logical Volume (LVM2) on an HDLM Device Is Used as a Boot Disk.
3. Update the kernel package or OS update package.
4. Execute the
dlmupdatesysinit
utility for updating system scripts.
For details about this utility, see 7.8 dlmupdatesysinit Utility for Updating System
Scripts.
5. Restart the host.
6. Specify the settings required for using an HDLM device as a boot disk.
Perform step 21 to 37 in 3.7.6 Upgrade Installation in an Environment Where a
Logical Volume (LVM2) on an HDLM Device Is Used as a Boot Disk.