HP Hitachi Dynamic Link Manager Software - Manual (Page 168)

3. Creating an HDLM Environment
144
Figure 3-6: Example of the Contents of the syslogd Settings File (In Red Hat
Enterprise Linux)
When you collect audit log data, we recommend that you use any of the extended
facilities (local0 to local7) as the exclusive output destination for the data. We also
recommend that you specify
info
as the severity level for the extended facility. This
example shows how to specify the recommended settings in the
/etc/syslog.conf
file:
local0.info /usr/local/audlog
(4) Setting the Mount Point (in Red Hat Enterprise Linux 5 or Red Hat Enterprise
Linux 6)
In Red Hat Enterprise Linux 5 or Red Hat Enterprise Linux 6, a DVD-ROM is not
automatically mounted.
Create the
/media/cdrom
directory beforehand.
(5) Checking the Partition
Confirm that the
/etc/opt
directory is located on the same partition as the root
directory (
/
).
Create the
/etc/opt
directory in advance when configuring the OS.
(6) Xen Settings
If Xen is being used, make sure that domainU has been stopped. If domainU has been
set to automatically start whenever domain0 starts, temporarily change the setting so
that domainU will not start automatically.
3.6.2 Performing a New Installation of HDLM
This subsection describes how to perform a new installation of HDLM. The
preparations before newly installing HDLM are required. For details about the
preparations before installing HDLM, see 3.6.1 Preparations for a New Installation
of HDLM.
To perform a new installation of HDLM: